DPM System for Glock Pistols, Glock 17/49 Gen 6 (Soft)

DPM System for Glock Pistols, Glock 17/49 Gen 6 (Soft)

Compensators, ported barrels, suppressors or reduced loads noticeably change the recoil behavior of the Glock 17 and 49 Gen 6 – and the single original recoil spring is not designed for these cases. The Soft version of the DPM System uses the same Progressive Triple Spring technology as the Standard version, but with a lighter base setup for noticeably reduced slide forces.

Seven outer springs in the strength ratings soft, medium and hard can be freely combined. This makes the system particularly suitable for training ammunition with reduced loads as well as for barrels with compensator, porting or suppressor. For factory ammunition, the Standard version here is the right choice.

Advantages at a glance:

• Tuned for reduced loads, compensators, ported barrels and suppressor use
• Seven outer springs in three strength ratings for precise fine-tuning
• Direct replacement for the factory single spring, no modification to the pistol
• Protects the pistol and a mounted red dot sight thanks to softer slide behavior

Features:

• Lighter base setup than the Standard version, same interchangeable spring set
• Soft springs (1.0 mm, black): short 7.5 lb, long 7.9 lb
• Medium springs (1.05 mm, grey): short 6.85 lb, medium 7.5 lb, long 8.15 lb
• Hard springs (1.1 mm, gold): short 7.7 lb, long 8.15 lb
• Total spring force with slide fully open: approx. 19 lb

Compatibility:

• Glock 17 (Gen 6)
• Glock 49 (Gen 6)

Application:

Fine-tuning is done solely by swapping the included recoil springs, without tools on the pistol itself. Please observe the manufacturer's installation instructions before first use.

Scope of delivery:

• 2× outer spring soft (1.0 mm, black)
• 3× outer spring medium (1.05 mm, grey)
• 2× outer spring hard (1.1 mm, gold)
• 1× guide rod with spring cup

OEM part number:

1000413